Seatposts

Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.

- Anti-Twist Technology keeps the saddle firmly positioned - Proprietary air & oil cartridge offers smooth consistent load range adjustment - Improved design easily switches from external to internal cable routing - Secure 2-bolt clamp design - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra long lower saddle rail guide designed to cradle lightweight saddle rails securely - Vertical travel: - 350mm - 100mm travel - 395mm - 125mm travel - 440mm - 150mm travel

Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.

Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.

A sweet upgrade for your ride, Easton's EA70 seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.

A sweet upgrade for your ride, Easton's EA70 Offset seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.

Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)

Stylus is a fresh new take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The top model Stylus–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - High-modulus carbon-fiber seatpost - Two-bolt parallel clamp - Weight: 195 grams

Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length

Easton's EC70 Zero Seatpost provides the low weight, strength and durability you're looking for. It utilizes vibration-damping carbon for a smooth, buzz-free ride, while Easton's Relief Area Design enhances strength without adding excess material. And, the EC70 features an easy-to-use, micro-adjustable two-bolt clamp to help you find your perfect position.

- Clamp adapter for WCS Alloy and/or WCS Carbon LINK Seatposts - Converts for Ritchey Vector Evo saddle usage - 15mm offset

Ritchey's Comp Carbon Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Low profile clamp won't bottom out on saddle - Bolts are oriented to the axis of the rails for greatest contact area with saddle - Wide saddle clamp reduces stress on lightweight saddle rails - Works with a wide range of saddle rail dimensions - Press bonded carbon/6061 alloy - Available in 27.2 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Matte UD carbon finish - 229g (27.2/350mm)

Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)

- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g

Saddle rail clamp outer-pieces to adapt Ritchey WCS Alloy 1-bolt posts to various saddle rail dimensions. • 8x8.5mm or 7x9.6mm available

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

Ritchey's beautiful Superlogic Carbon Seatpost is made of high modulus monocoque carbon for ultra low weight and impressive vibration damping without sacrificing strength. Ritchey's single bolt clamp uses precision forged aluminum hardware, which cuts weight even further! And, the single bolt clamp makes installation and adjustment a breeze, too.

New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right

Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever

Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years

Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.

• Forged aluminum • Integrated micro-adjust seat clamp

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

Giant's Aluminum Replacement Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in your saddle position.

- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA

- CNC-machined 6061-T6 aluminum with titanium hardware - Zero-friction cam surface treatment ensures smooth lever action - 27g

New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - 150mm and 170mm travel options available in all diameters - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 560g (weight based on 340mm post, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300mm hose) - LENGTH: 340mm, 390mm, 440mm, 480mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero Offset , Remote: Adjustable return speed at the handlebar, Discrete or Match Maker X, Left or right - AVAILABLE IN: Travel: 100/125/150/170mm ; Diameter: 30.9/31.6/34.9mm

Choose from the many colors and add style to your ride with Origin-8's Compe-Lite Seat Post. It's crafted from light and durable 6000 aluminum, and features a single-bolt adjustable clamp for easy seat installation and fine-tuning.